Bellevue House Painters — Interior & Exterior
Elegant Painting® has painted homes in Bellevue since 2005. Exterior, interior, cabinets and decks, done by our own employees. No subcontractors.

I learned the trade working for a Bellevue painting company. After four or five years there I got my own license in 2005 and started Elegant Painting®. Bellevue is where it started for me, and we've been painting here ever since.
Our crew is made up of long-time, background-checked W-2 employees. The same people who start your job finish it, and I'm on the job every day. You get one fixed price before we start, and that's what you pay.
We paint all over Bellevue, plus Medina, Clyde Hill, Hunts Point, Beaux Arts and Newcastle. Below you'll find how we paint here, real jobs, and what things cost.
Exterior painting in Bellevue
Bellevue has every kind of house: 1960s and 70s ramblers and split-levels with wood siding, 80s and 90s two-stories, newer Hardie board homes, and big custom houses with brick, stone and a lot of trim. Each one needs something a little different, but the paint fails for the same reasons almost every time: it went on over damp wood, or over old paint that was already letting go.
Here's how we do it:
- We check the wood with a moisture meter. We don't paint wood above 15% moisture. If it's too wet, we wait.
- We wash first. Washing takes off dirt, mildew, spider webs and the film of pollution that would otherwise end up mixed into your paint.
- We scrape and sand. Loose and failing paint comes off before anything goes on.
- We prime bare wood with oil primer, by brush and roller, so it gets worked into the grain. On cedar it also stops the brown tannin stains from bleeding through.
- Two coats, back-rolled. We spray, and a second painter follows with a roller so the paint gets pushed into the siding instead of sitting on top.
- We use Sherwin-Williams Emerald Exterior, and it's included in every price we give.

We protect everything around the house. Windows, decks, concrete and plants get covered before we prep. On bigger homes we paint one side at a time, so you're not giving up your whole house for weeks.
More about our process: exterior painting and why we don't paint wet wood.
Interior painting in Bellevue
A lot of Bellevue interiors have tall entries, open stairwells, vaulted great rooms and a lot of trim. Newer homes often have millwork, built-ins and paneling. That's the kind of work we like.
- We cover floors and furniture, and move furniture and put it back.
- We patch, sand and caulk before we paint.
- Two coats on everything. Sherwin-Williams Emerald on walls and trim, and a flat ceiling paint on ceilings so you don't see roller marks.
- We clean up every day.

Cutting in door trim, and a master bedroom with painted built-ins around the fireplace. Both in Bellevue.

See our interior painting and fine-finish millwork pages for more.
Cabinet painting in Bellevue
Painting your kitchen cabinets costs a lot less than replacing them, but only if it's done right. We take the doors and drawers off, prime with a shellac primer that sticks to the old finish, and spray several coats of a hard urethane cabinet paint. If you want, we can switch old exposed hinges to hidden soft-close hinges while the doors are off.

More on our cabinet painting process and cabinet prices.
Recent Bellevue and Medina jobs
Grade 13 home in Bellevue
King County grades homes by how they're built, and 13 is the top of the scale. This one is brick with a lot of white trim, columns and windows. The color is Sherwin-Williams Divine White SW 6105, and we used Sherwin-Williams Emerald on every surface. See the photos.
Brick home in Medina (August 2020)
The brick stays, so the work here was all the wood: windows, French doors, fascia, dormers, the balcony and the round columns. We masked the brick and glass, sprayed the doors, and brushed and rolled the windows and trim.



Exterior and deck refinishing in Bellevue
The whole outside: siding, doors, windows, trim, decks and railings. We washed the house first, which took off bee nests, spider webs and a lot of cedar bleed. After scraping and sanding we primed the bare wood with oil primer by hand, then put on two back-rolled coats. The railings got the same prep as the house. The deck boards were stripped all the way down. We even painted the old hose bibs so they'd match.
Latte siding with white trim in Bellevue
Vertical wood siding and brick. We painted the siding Sherwin-Williams Latte SW 6108 and the trim white, and left the brick alone. See more on Latte.


What does painting cost in Bellevue?
These prices come from jobs we have done, not quotes. Every Bellevue house is different, so we look at yours before giving a number.
| Project | Typical price |
|---|---|
| Exterior, standard two-story Hardie plank home | $12,000 – $14,000 + tax |
| Exterior, larger custom home | $16,000 – $25,000 + tax |
| Exterior, estate home | From about $60,000 + tax |
| Interior, one bedroom (walls only) | From about $800 + tax |
| Interior, one bedroom (walls, ceiling, trim, doors) | From about $1,600 + tax |
| Interior, whole house | From $18,000 + tax |
What changes the price most: the size of the house, how much paint is peeling, how many stories, how steep the lot is, and on the inside, how much trim and millwork there is. See our full exterior prices, interior prices and cabinet prices.
Why Bellevue homeowners hire us
- Our own employees. No subcontractors, no temp labor. Background-checked W-2 painters who've been with us for years.
- Owner on the job. You deal with me, not a salesperson.
- One fixed price. The number on your quote is the number you pay.
- Lifetime workmanship warranty and a lifetime missed-spot guarantee.
- Premium paint. Sherwin-Williams Emerald, inside and out.
- Licensed, bonded and insured in Washington: license ELEGAP*821B3.
Bellevue painting questions
When is the best time to paint a house exterior in Bellevue?
Usually late spring through early fall, when the wood has dried out. We check moisture before we paint, so a dry stretch in spring or fall can work too. Interiors and cabinets we do all year.
Why is the paint on my house peeling?
Most of the time the paint went on over damp wood, or over old paint that wasn't stuck down well. The fix is good scraping and sanding, priming bare wood, and only painting when the wood is dry. Read more: why exterior paint peels.
Do I need HOA approval for my colors?
Many Bellevue neighborhoods have HOA color rules. We're used to working with them and can help you pick colors that fit.
Do you use subcontractors?
No. Everyone on your job is an Elegant Painting® employee.
Do I have to be home while you paint?
Not for exteriors. For interiors, many clients go to work as usual. We'll talk through access and pets before we start.
How do I get a price?
Send us a request with your address and what you'd like painted. Photos help. We'll come look at the house and give you one fixed price.
Nearby: Redmond, Kirkland, Issaquah, Sammamish, Mercer Island and Newcastle.
