Exterior project report · Completed April 14, 2014
This house had several different surfaces to work with: fiber-cement siding, cedar shakes, trim and metal doors. We documented each part of the job, from washing and protection through the second coat. The report was completed on April 14, 2014.

Before the work
We washed the exterior on March 12 and returned for preparation and painting in April. This was our seventh house in the development at the time. The original color board shown below pairs Kendall Charcoal HC-166 with White Dove OC-17.


Cedar shakes and careful protection
We started with the upper areas and worked down. On the cedar shakes, our job notes record two coats of Benjamin Moore solid-color stain. The roof, nearby plants and equipment were protected while we worked.





Preparing the fiber-cement siding
We worked through the siding and trim before the finish coats. The original photos show the caulking used on this job. Joint treatment depends on the siding system and its installation instructions; these are records of this particular project, not a direction to caulk every siding joint.


Keeping track of both coats
The original progress photos marked first- and second-coat areas so the homeowner could follow the work. We completed the upper sections before moving to the easier-to-reach parts of the house.






Front door, garage doors and finished details
The metal doors were sprayed with fine-finish tips. Our original notes list Benjamin Moore Regal Select MoorGlo Soft Gloss for the exterior trim and doors. We kept the door profiles and the contrast with the light trim visible in the finished photos.







Planning a similar project?
See our exterior painting services, or request a painting estimate. Tell us what you would like to change and we can take a look.
See more of our work · (425) 588-9288
Elegant Painting® · Serving the Eastside since 2005
